YSHIELD PRO54/HF+LF Shielding Paint

25 up to 40 dB / Pure acrylic / Our best paint without graphite.

Technically our best paint, that is formulated without graphite. One paint for all, if you have high requirements. Based on a high quality pure acrylic binder.
Frost resistant: Suitable for shipping during winter time and for sea freights in containers. Breathable, solvent free, low-emission.

Special feature
This paint is formulated without graphite, which has many advantages:
• Does not stain off while over painting with white wall paint.
• Impacts against the white covering paint don't produce black stripes any more.
• The surface of the paint film is microporous rough and offers top coatings a catchy underground for excellent adhesion.
• With 4.8 N/mm² this paint has an extremely high adhesive tensile strength (adhesive power on the underground) for a wall paint, which is 2 times higher than with our graphite paints.

The lack of graphite has only one disadvantage:
The electrical resistance and therefore the shielding attenuation is 10 dB lower per layer. We always highly recommend a two-layer application with this paint. Therewith you reach the typical 35-40 dB attenuation. The slightly higher costs due to the second coat are compensated by the many advantages.

Weight Price
YSHIELD PRO54 - 5 LitrePRO54-5 7.5 kg £148.30
YSHIELD PRO54 - 1 LitrePRO54-1 1.5 kg £37.49

Technical Specification

Screening attenuation: One-layer 25 dB (7.5 qm/l) to 30 dB (5 qm/l), two-layer 35 dB (3.75 qm/l) to 40 dB (2.5 qm/l). The shielding attenuation is regularly tested in our own EMC laboratory. We have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07.
Common: Our shielding paints, shielding with carbons has many advantages, see common characteristics.
Application (coverage): Interior (5 - 7.5m²/l), exterior (2.5 - 3.75m²/l).
Underground: Interior and exterior: Excellent adhesion on almost all undergrounds like existing emulsion paints, sheetrock, wallpaper, cement, plaster, masonry, wood, etc. In technical applications: Plastic substrates, glass, flexible films, carpet, laminate, etc.
Top coating: Preferably covered with plastic bonded, water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints. Not applicable are pure mineral paints (clay, loam, chalk, silicate). Due to the high adhesive tensile strength (to ETAG 004 for EIFS-systems, minimum 0.08 N/mm²), applicable directly under pure organic plaster, no mineral plasters!
Ingredients: Water, pure acrylic dispersion, carbon fibres, carbon black, additives, preservative (MIT, BIT).
VOC-content: 0.2 g/l
Sd-value: 0.1 m.
Ph-value: 8.
Adhesive tensile strength: 4.8 N/mm².
Shelf life: 12 months.
Colour: Black.
Grounding: Must be grounded! We recommend interior the Grounding Strap EB2 plus Grounding Plate GW, with Grounding cable GC-200 Plugged into Grounding plate Tube-GT/Attach to copper Heating Pipes or Grounding Plug GP - (German & French) also available: 3 Pin (UK) Earth Plug, exterior the Fibre Additive AF3 plus the Grounding Plate GE with Grounding rod GR-100/Exterior

Delivery Time: Usually between 2 - 3 working days

Common characteristics:
Easy handling and processing
YSHIELD shielding paints can exceedingly be applied for all purpose. Easy application. All paints are best applied with a paint roller.

Perfect corrosion resistance
Our shielding paints do not contain any metals but a mixture of carbons instead. That's why our shielding paints are chemically stable and permanent corrosion-free, even in damp environment.

Emissions VOC / PAH
Our shielding paints are tested regularly from the TÜV-SÜD on the content of VOC (volatile organic compounds) and PAH (polycyclic aromatic hydrocarbons). 1) The actual VOC limit is 30 g/l, our paints contain only 0.1 g/l to 1 g/l. 2) The recommended PAH limit (for category 1) is 0.2 mg/kg. Our paints contain 0.002 mg/kg, so they are 100 times below the limit for children toys.

Any kind of aqueous paint must be preserved. Controversial, is the use of Isothiazolinone- compounds, referring to CIT only. CIT is not contained in our paints. Further to this we reject preservation with BIT/silver, like utilized in eco-paints, as we don't want to use nanosilver. Our preservation with MIT/BIT has a very low allergenic potential, which is regularly confirmed by MCS-customers. As an alternative, our shielding paint HSF74, is free from any kind of preservatives.

Due to its paint-typical holohedral structure without holes, our shielding paints provide a nearly linear attenuation up to very high frequencies, regardless of the direction of signal polarization. Proved up to 18GHz they are very future-proof.

Customer Reviews

There are currently no reviews of this product.