Stainless Steel Gauze-V4A10/HF+LF Shielding

Applications for the interior and exterior under-plaster insulations

V4A10 is a finely woven, noncorrosive stainless-steel gauze for the protection against high-frequency radiation (HF) and low-frequency electric
fields (LF).

Typical application for the interior and exterior under-plaster in upgraded insulations, in roof areas, at drywall constructions, as flyscreen, for loosely laid, etc.

V4A (AISI 316) is resistant against water, water vapour, air humidity, mild acids and in coastal areas against salty seawater!

Weight Price
25m roll/gauze/width 100cm V4A10 -25 11.5 kg £237.26
Stainless steel gauze/metres/width 100cm V4A10 0.3 kg £10.37

Technical Specification

Width: 100 cm.
Length: 1 metre, available by the running meter. 25 metre roll available.
You can also order this product in measurements of your choice. For example:- 4.6 linear meters!
This product is cut off a large roll according to customer specifications. A return is not possible!
Attenuation: 40 dB at 1 GHz, two-layers 60 dB
Mesh width: 1.00 mm; wire diameter: 0.16 mm; material thickness: 0.32 mm.
Weight: 260 g/m².
Open area: 70%
Colour: Silver.
Fire-proof material: A1 according DIN 4102:1994.
Surface conductivity: 0.1 Ohm (square resistance)

Delivery Time: Usually between 2 - 3 working days

In case processing the V4A10 under plaster you should work with a preferably fine and organic filler. Under the floor covering (laminate, parquet, PVC coating, etc.) the V4A10 is being fixed with the adhesive used for the floor covering. For drywall construction and in roof area the mesh elements can be bolted or stapled together. The rule is: Always overlapp the single elements at least 5 cm. For grounding use the perforated stainless steel tape ELB by screwing it right across the elements into the surface

Electrically conductive. Can be contacted and grounded to shield electric fields (LF). Please find corresponding components under Shielding Grounding Accessories. A recommendation here is difficult because this depends on the application. Please ask us!

Shielding attenuation:
The above mentioned screening attenuation values always apply to 1Ghz. The screening attenuation is regularly tested in our own EMC laboratory, we have measurement setups due to the following standards: ASTM D4935-10, IEEE Std 299-2006, IEEEE Std 1128-1998, ASTM A698/A698M-07. You'll find the PDF test report with further details above on this page.

Customer Reviews

There are currently no reviews of this product.